| * | dnlist | The list of numbers to be changed. |
| * | dateTime |
The effective date/time of the record. The format of
this value is:
mm/dd/yy hh:mmX/Y
where X is the meridiem (A or P), and Y is the SMS/800 timezone
indicator. An example of a valid date/time would be:
07/01/98 10:15A/C.
Be aware that Somos only allows schedule date/times
where the minute on the quarter hour
:00,
:15,
:30,
or
:45.
Any other value for minute will cause the record to fail validation. This field may also contain the value NOW to request an immediate change. |
| resporg | The RespOrg, sent in the SMS/800 newro field. This field allows a RespOrg change to be sent. | |
| interLATACarrier | The numeric CIC code of the primary InterLATA carrier, sent in the SMS/800 iec field. | |
| intraLATACarrier | The numeric CIC code of the primary IntraLATA carrier, sent in the SMS/800 iac field. | |
| potsTermination | A POTS number to which SMS/800 will direct calls, sent in the SMS/800 tel field. Also see interLATAPOTSValue below. | |
| interLATAPOTSValue |
Allows InterLATA POTS to be specifed. If a value is specified
in the |
|
| orderNumber | The Service Order Number, sent in the SMS/800 so field. Must be from 4-13 bytes, where the first character is alphabetic, the second through twelfth characters are alphanumeric, and the thirteenth character is alphabetic. | |
| sfNumber | The Supplemental Form Number, sent in the SMS/800 sf field. Must be 1-6 alphanumeric characters. Required if Service Order Number is not specified. | |
| planDN | The dialed number serving as the source of the complex routing plan. Also see complexRecord below. | |
| complexRecord | The name of the entry in the RPLAN table that contains the complex routing for this record. The values from planDN and complexRecord are used as an index into RPLAN. | |
| notes | Commentary to be sent in the SMS/800 note field. Can be up to 151 characters. | |
| lns | The number of terminating lines sent in the SMS/800 lns field. Format is 1 to 4 decimal numerals. | |
| duedate | The Due Date, sent in the SMS/800 dd field. Format is MM/DD/YY. If not specified, SMS/800 will generate a value. | |
| holdValue | The Hold Due Date indicator, sent in the SMS/800 hdd field. Allowable values are 0 and 1. | |
| rao |
The Revenue Accounting Office, sent in the SMS/800
rao field. Must be 3 bytes, decimal numerals.
The following rules apply to this field:
|
|
| billToNumber | The Bill To, or Alternate Billing Number, sent in the SMS/800 abn field. Must be 10 alphanumeric characters. If rao is 999, then billToNumber must be 9999999999. | |
| customer | The On-Line Access Customer, sent in the SMS/800 cus field. Must be 5 alphanumeric characters. | |
| agent | The On-Line Agent for Customer, sent in the SMS/800 agent field. Must be 5 alphanumeric characters. | |
| telco | The company that sold SMS access, sent in the SMS/800 telco field. Must be 4 alphanumeric characters. | |
| icecBilling | The IC/EC Billing Indicator, sent in the SMS/800 cbi field. Must be 3 alphabetic characters for an Interexchange Carrier, 4 alphabetic characters for an Exchange Carrier. | |
| contactName | The name of the contact person, sent in the SMS/800 ncon field. Maximum of 30 characters. | |
| contactPhone | The Contact Phone Number, sent in the SMS/800 ctel field. Must be 10 decimal numerals. | |
| interceptDate | The End Intercept Date, sent in the SMS/800 eint field. Format is MM/DD/YY. An End Intercept Date is used for disconnect records. Specifying a value for interceptDate will cause a disconnect rather than a change to be sent. | |
| referralOption | The Referral Option, sent in the SMS/800 refer field, and used for disconnect records. Allowable values are 0 and 1. | |
| network | Network Area of Service, sent in the SMS/800 anet field. The value is a comma-separated list of valid SMS/800 network codes. | |
| state | State Area of Service, sent in the SMS/800 asta field. The value is a comma-separated list of valid SMS/800 state codes. | |
| areacode | Area Code Area of Service, sent in the SMS/800 aac field. The value is a comma-separated list of valid area codes. | |
| lata | LATA Area of Service, sent in the SMS/800 alat field. The value is a comma-separated list of valid LATAs. | |
| labels | Label Area of Service, sent in the SMS/800 albl field. The value is a comma-separated list of valid SMS/800 AOS label names. The SMS/800 MGI provides no means to define AOS labels; they must previously exist. | |
| directoryAssistanceType | The Directory Assistance Type, sent in the SMS/800 dat field. The valid values are N (Normal), G (Government), and F (Frequently Called). | |
| updateValue | The Directory Assistance Update indicator, sent in the SMS/800 dau field. The valid values are 0 and 1. | |
| listingType | The Listing Type, sent in the SMS/800 li field. The valid values are BL (BLocked), LI (Published), and NP (Non-published). | |
| address | The Listing Address, sent in the SMS/800 la field. Can be up to 75 characters. | |
| names | The Listing Names, sent in the SMS/800 ln field. Up to nine listing names can be specified, each up to 75 characters, separated by the ~ character. | |
| highpriority | This parameter provides access to the SMS/800 High Priority Update feature. Setting it to 1 will tell SMS to place this customer record at the front of the SCP queue. Only a small number of these updates can be done each day. After that, if this parameter is set to 1 the message will fail. You may check the Activity Log to see how many such updates remain for the current day. | |
| comment | A comment describing the batch operation. | |
| flowmax | The maximum number of messages per hour sent to SMS/800. | |
| rundate |
The date/time when this batch will run.
The format of this value is:
mm/dd/yy hh:mmX
where X is the meridiem (A or P).
To run a batch immediately, either don't use this parameter or set the value to NOW. |